1-6
DSP56367
MOTOROLA
DSP56367 Overview
DSP56300 Core Functional Blocks
•
Conditional ALU instructions
•
24-bit or 16-bit arithmetic support under software control
•
Four 24-bit input general purpose registers: X1, X0, Y1, and Y0
•
Six Data ALU registers (A2, A1, A0, B2, B1, and B0) that are concatenated into two
general purpose, 56-bit accumulators (A and B), accumulator shifters
•
Two data bus shifter/limiter circuits
1.4.1.1
Data ALU Registers
The Data ALU registers can be read or written over the X memory data bus (XDB) and the Y
memory data bus (YDB) as 24- or 48-bit operands (or as 16- or 32-bit operands in 16-bit
arithmetic mode). The source operands for the Data ALU, which can be 24, 48, or 56 bits (16,
32, or 40 bits in 16-bit arithmetic mode), always originate from Data ALU registers. The
results of all Data ALU operations are stored in an accumulator.
All the Data ALU operations are performed in two clock cycles in pipeline fashion so that a
new instruction can be initiated in every clock, yielding an effective execution rate of one
instruction per clock cycle. The destination of every arithmetic operation can be used as a
source operand for the immediately following arithmetic operation without a time penalty
(i.e., without a pipeline stall).
1.4.1.2
Multiplier-Accumulator (MAC)
The MAC unit comprises the main arithmetic processing unit of the DSP56300 core and
performs all of the calculations on data operands. In the case of arithmetic instructions, the
unit accepts as many as three input operands and outputs one 56-bit result of the following
form- Extension:Most Significant Product:Least Significant Product (EXT:MSP:LSP).
The multiplier executes 24-bit
×
24-bit, parallel, fractional multiplies, between
two’s-complement signed, unsigned, or mixed operands. The 48-bit product is right-justified
and added to the 56-bit contents of either the A or B accumulator. A 56-bit result can be stored
as a 24-bit operand. The LSP can either be truncated or rounded into the MSP. Rounding is
performed if specified.
1.4.2
ADDRESS GENERATION UNIT (AGU)
The AGU performs the effective address calculations using integer arithmetic necessary to
address data operands in memory and contains the registers used to generate the addresses. It
implements four types of arithmetic: linear, modulo, multiple wrap-around modulo, and
reverse-carry. The AGU operates in parallel with other chip resources to minimize
address-generation overhead.
Содержание DSP56367
