manualshive.com logo in svg

Motorola DSP56367, Руководство пользователя

Motorola DSP56367 - процессор с собственными средствами цифровой обработки сигналов, обеспечивающий высокую производительность и эффективность. Пользователям доступны инструкции по эксплуатации в бесплатном режиме для скачивания на manualshive.com. Ознакомьтесь с руководством пользователя перед использованием продукта.

Поделиться
Скачать
background image

 

10-40

DSP56367

MOTOROLA

Enhanced Serial Audio Interface (ESAI)

ESAI Programming Model

shift registers are transferred to the receive data registers. RODF is cleared when the DSP 
reads all the enabled receive data registers or cleared by hardware, software, ESAI individual, 
or STOP resets. 

10.3.6.10

SAISR Transmit Frame Sync Flag (TFS) - Bit 13

When set, TFS indicates that a transmit frame sync occurred in the current time slot. TFS is 
set at the start of the first time slot in the frame and cleared during all other time slots. Data 
written to a transmit data register during the time slot when TFS is set is transmitted (in 
network mode), if the transmitter is enabled, during the second time slot in the frame. TFS is 
useful in network mode to identify the start of a frame. TFS is cleared by hardware, software, 
ESAI individual, or STOP reset. TFS is valid only if at least one transmitter is enabled (i.e. 
one or more of TE0, TE1, TE2, TE3, TE4 and TE5 are set).

Note:

In normal mode, TFS always reads as a one when transmitting data because there 

is only one time slot per frame – the “frame sync” time slot.

10.3.6.11

SAISR Transmit Underrun Error Flag (TUE) - Bit 14

TUE is set when at least one of the enabled serial transmit shift registers is empty (no new 
data to be transmitted) and a transmit time slot occurs. When a transmit underrun error occurs, 
the previous data (which is still present in the TX registers that were not written) is 
retransmitted. If TEIE is set, an ESAI transmit data with exception (underrun error) interrupt 
request is issued when TUE is set. Hardware, software, ESAI individual, and STOP reset clear 
TUE. TUE is also cleared by reading the SAISR with TUE set, followed by writing to all the 
enabled transmit data registers or to TSR.

10.3.6.12

SAISR Transmit Data Register Empty (TDE) - Bit 15

TDE is set when the contents of the transmit data register of all the enabled transmitters are 
transferred to the transmit shift registers; it is also set for a TSR disabled time slot period in 
network mode (as if data were being transmitted after the TSR was written). When set, TDE 
indicates that data should be written to all the TX registers of the enabled transmitters or to the 
time slot register (TSR). TDE is cleared when the DSP writes to all the transmit data registers 
of the enabled transmitters, or when the DSP writes to the TSR to disable transmission of the 
next time slot. If TIE is set, an ESAI transmit data interrupt request is issued when TDE is set. 
Hardware, software, ESAI individual, and STOP reset clear TDE.

10.3.6.13

SAISR Transmit Even-Data Register Empty (TEDE) - Bit 16

When set, TEDE indicates that the enabled transmitter data registers became empty at the 
beginning of an even time slot. Even time slots are all even-numbered slots (0, 2, 4, 6, etc.). 
Time slots are numbered from zero to N-1, where N is the number of time slots in the frame. 
The zero time slot is considered even. This flag is set when the contents of the transmit data 
register of all the enabled transmitters are transferred to the transmit shift registers; it is also 
set for a TSR disabled time slot period in network mode (as if data were being transmitted 
after the TSR was written). When set, TEDE indicates that data should be written to all the TX 

Содержание DSP56367













































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для DSP56367

Breville BFP50 Instructions And Recipes Manual preview
BFP50
Бренд: Breville Страницы: 7
CHIEF SSBU Installation Instructions Manual preview
SSBU
Бренд: CHIEF Страницы: 24
Barco RLD (3.0-4.5:1) Installation Manual preview
RLD (3.0-4.5:1)
Бренд: Barco Страницы: 9
Sonic Frontiers Sonic Frontiers SFD-1 MK-II Owner'S Manual preview
Sonic Frontiers SFD-1 MK-II
Бренд: Sonic Frontiers Страницы: 2
Magic Chef MCFC1W Owner'S Manual preview
MCFC1W
Бренд: Magic Chef Страницы: 8
Thomas THCM8255 Instruction Manual preview
THCM8255
Бренд: Thomas Страницы: 38
Black & Decker HandyChopper HC2000 Use And Care Book Manual preview
HandyChopper HC2000
Бренд: Black & Decker Страницы: 6
Beaba babycook pro Instruction Manual preview
babycook pro
Бренд: Beaba Страницы: 24
Extron electronics Active Audio AAP Specification Sheet preview
Active Audio AAP
Бренд: Extron electronics Страницы: 1
Home electric MZ5002R User Manual preview
MZ5002R
Бренд: Home electric Страницы: 17
Radial Engineering JX44 V2 Owner'S Manual preview
JX44 V2
Бренд: Radial Engineering Страницы: 20
Panamorph ATH2 Owner'S Manual preview
ATH2
Бренд: Panamorph Страницы: 16
MAGIMIX Ma Cuisine Instructions For Use Manual preview
Ma Cuisine
Бренд: MAGIMIX Страницы: 79
Barco DP2K C User And Installation Manual preview
DP2K C
Бренд: Barco Страницы: 184
Epson ELPMBP02 - False Ceiling Plate Installation And Assembly Manual preview
ELPMBP02 - False Ceiling Plate
Бренд: Epson Страницы: 6
Parker PVD 3642-EN Manual preview
PVD 3642-EN
Бренд: Parker Страницы: 5
Barco POLARIZER R812319K Installation Manual preview
POLARIZER R812319K
Бренд: Barco Страницы: 13
InFocus SP-LAMP-090 Replacement Instructions preview
SP-LAMP-090
Бренд: InFocus Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды