manualshive.com logo in svg

Motorola Canopy 150 Mbps Backhaul, Руководство пользователя

Motorola Canopy 150 Mbps Backhaul – продукт высокоскоростной передачи данных, обеспечивающий скорость до 150 Мбит/с. Бесплатно скачайте руководство пользователя на manualshive.com, чтобы настроить и использовать устройство. Инструкция доступна для загрузки в формате PDF. Получите максимум от вашего оборудования!

Поделиться
Скачать
background image

 

Issue 1.1 April 2006 

 

Page 169  

 

18.4 Legal 

Notices 

18.4.1  Software License Terms and Conditions 

ONLY OPEN THE PACKAGE, OR USE THE SOFTWARE AND RELATED PRODUCT IF YOU 
ACCEPT THE TERMS OF THIS LICENSE. BY BREAKING THE SEAL ON THIS DISK KIT / CDROM, 
OR IF YOU USE THE SOFTWARE OR RELATED PRODUCT, YOU ACCEPT THE TERMS OF THIS 
LICENSE AGREEMENT. IF YOU DO NOT AGREE TO THESE TERMS, DO NOT USE THE 
SOFTWARE OR RELATED PRODUCT; INSTEAD, RETURN THE SOFTWARE TO PLACE OF 
PURCHASE FOR A FULL REFUND. THE FOLLOWING AGREEMENT IS A LEGAL AGREEMENT 
BETWEEN YOU (EITHER AN INDIVIDUAL OR ENTITY), AND MOTOROLA, INC. (FOR ITSELF AND 
ITS LICENSORS).  THE RIGHT TO USE THIS PRODUCT IS LICENSED ONLY ON THE CONDITION 
THAT YOU AGREE TO THE FOLLOWING TERMS.   

Now, therefore, in consideration of the promises and mutual obligations contained herein, and for other 
good and valuable consideration, the receipt and sufficiency of which are hereby mutually 
acknowledged, you and Motorola agree as follows: 

Grant of License.

 Subject to the following terms and conditions, Motorola, Inc., grants to you a 

personal, revocable, non-assignable, non-transferable, non-exclusive and limited license to use on a 
single piece of equipment only one copy of the software contained on this disk (which may have been 
pre-loaded on the equipment)(Software). You may make two copies of the Software, but only for 
backup, archival, or disaster recovery purposes.  On any copy you make of the Software, you must 
reproduce and include the copyright and other proprietary rights notice contained on the copy we have 
furnished you of the Software. 

Ownership.

 Motorola (or its supplier) retains all title, ownership and intellectual property rights to the 

Software and any copies, including translations, compilations, derivative works (including images) 
partial copies and portions of updated works. The Software is Motorola’s (or its supplier's) confidential 
proprietary information. This Software License Agreement does not convey to you any interest in or to 
the Software, but only a limited right of use. You agree not to disclose it or make it available to anyone 
without Motorola’s written authorization. You will exercise no less than reasonable care to protect the 
Software from unauthorized disclosure. You agree not to disassemble, decompile or reverse engineer, 
or create derivative works of the Software, except and only to the extent that such activity is expressly 
permitted by applicable law. 

Termination.

  This License is effective until terminated.  This License will terminate immediately without 

notice from Motorola or judicial resolution if you fail to comply with any provision of this License.  Upon 
such termination you must destroy the Software, all accompanying written materials and all copies 
thereof, and the sections entitled Limited Warranty, Limitation of Remedies and Damages, and General 
will survive any termination. 

Limited Warranty.

  Motorola warrants for a period of ninety (90) days from Motorola’s or its customer’s 

shipment of the Software to you that (i) the disk(s) on which the Software is recorded will be free from 
defects in materials and workmanship under normal use and (ii) the Software, under normal use, will 
perform substantially in accordance with Motorola’s published specifications for that release level of the 
Software.  The written materials are provided "AS IS" and without warranty of any kind.  Motorola's 
entire liability and your sole and exclusive remedy for any breach of the foregoing limited warranty will 
be, at Motorola's option, replacement of the disk(s), provision of downloadable patch or replacement 
code, or refund of the unused portion of your bargained for contractual benefit up to the amount paid for 
this Software License. 

THIS LIMITED WARRANTY IS THE ONLY WARRANTY PROVIDED BY MOTOROLA, AND 
MOTOROLA AND ITS LICENSORS EXPRESSLY DISCLAIM ALL OTHER WARRANTIES, EITHER 
EXPRESS OF IMPLIED, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF 
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  
MOTOROLA DOES NOT WARRANT THAT THE OPERATION OF THE SOFTWARE WILL BE 
UNINTERRUPTED OR ERROR-FREE, OR THAT DEFECTS IN THE SOFTWARE WILL BE 
CORRECTED.  NO ORAL OR WRITTEN REPRESENTATIONS MADE BY MOTOROLA OR AN 

Содержание Canopy 150 Mbps Backhaul















































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Canopy 150 Mbps Backhaul

NetComm NF12 Configuration Manual preview
NF12
Бренд: NetComm Страницы: 3
i. Tech Dynamic BlueCON35 II User Manual preview
BlueCON35 II
Бренд: i. Tech Dynamic Страницы: 8
NETGEAR RangeMax WNR3500 Brochure preview
RangeMax WNR3500
Бренд: NETGEAR Страницы: 2
YOKOGAWA YFGW520 User Manual preview
YFGW520
Бренд: YOKOGAWA Страницы: 45
Cisco 1130AG - Aironet - Wireless Access Point Quick Start Manual preview
1130AG - Aironet - Wireless Access Point
Бренд: Cisco Страницы: 48
D-Link DSL-2730R Quick Installation Manual preview
DSL-2730R
Бренд: D-Link Страницы: 16
D-Link DSL Series Configuration Manual preview
DSL Series
Бренд: D-Link Страницы: 10
D-Link DIR-905L Quick Installation Manual preview
DIR-905L
Бренд: D-Link Страницы: 32
D-Link dlinkgo GO-RTW-N300 Brochure & Specs preview
dlinkgo GO-RTW-N300
Бренд: D-Link Страницы: 3
D-Link DSR-1000AC Quick Installation Manual preview
DSR-1000AC
Бренд: D-Link Страницы: 72
D-Link DIR-900L Quick Installation Manual preview
DIR-900L
Бренд: D-Link Страницы: 32
D-Link DIR-LX1870 Quick Installation Manual preview
DIR-LX1870
Бренд: D-Link Страницы: 2
D-Link DSL-2740R User Manual preview
DSL-2740R
Бренд: D-Link Страницы: 73
D-Link DPG-2100 - Wireless Presentation Gateway Quick Installation Manual preview
DPG-2100 - Wireless Presentation Gateway
Бренд: D-Link Страницы: 12
D-Link DSL 2640B Setup Manual preview
DSL 2640B
Бренд: D-Link Страницы: 4
D-Link dlinkgo GO-RTW-N300 User Manual preview
dlinkgo GO-RTW-N300
Бренд: D-Link Страницы: 101
D-Link DIR-846 User Manual preview
DIR-846
Бренд: D-Link Страницы: 53
D-Link DSL-G664T User Manual preview
DSL-G664T
Бренд: D-Link Страницы: 88

Бренды по названию

Популярные бренды

Загрузить еще бренды