Motorola BSR 2000, Руководство по настройке и управлению

Страница: 70 / 650

BSR 2000 Configuration and Management Guide Release 1.0
3-20 MGBI 526360-001-00 Rev. B
A.B.C.D
is the IP address of the SYSLOG server
For example:
MOT (config )#
logging 10.10.10.53
2. Specify the logging facility with the logging facility command in Global
Configuration mode:
MOT
(config
)#
logging facility { local0 | local1 | local2 | local3 | local4 | local5
| local6 | local7 }
If you do not identify the logging facility using this command, the system defaults
to
local7 .
3. Specify the severity level of messages to be logged to the SYSLOG server with
the
logging trap command in Global Configuration mode:
MOT
(config
)#
logging trap { alerts | critical | emergencies | errors |
informational | notifications | warnings }
Specify the severity level of messages to be logged to the SYSLOG server with
the
logging snmp-trap command, in Global Configuration mode:
MOT
(config
)#
logging snmp-trap [ alerts | critical | emergencies | errors |
informational | notifications | warnings ]
where:
alerts logs conditions where immediate action is needed
critical logs critical conditions
emergencies logs emergency conditions where the system is unusable
errors logs error conditions
informational logs informational system messages
notifications logs normal but significant conditions
warnings logs warning conditions
Note: The logging trap and logging snmp-trap commands limit the logging
messages sent to a SYSLOG server to messages with a level up to and
including the severity level specified with these commands.