Motorola BSR 2000, Руководство по настройке и управлению

Страница: 60 / 650

BSR 2000 Configuration and Management Guide Release 1.0
3-10 MGBI 526360-001-00 Rev. B
For example:
MOT
(config)
# username newuser privilege rw
Defining a Group Access Level
To define a group access level for a user account, use the following command in
Global Configuration mode:
MOT
(config)
# username <
WORD
> user-group { isp
<1-1
> | mso | sysadmin }
where:
WORD
is the user account login name
user-group is one of the groups shown below ( Table 3-2 ). The ISP and MSO
groups have access to a specific set of CLI commands.
For example:
MOT(config)#
username newuser user-group mso
Verifying Your User Account Login Configuration
Use the show running-config command in Privileged EXEC mode to verify your
user account configuration:
MOT(config)#
show running-config
In the following example, user account passwords have not been encrypted:
Table 3-2 User Group Privilege Levels
User Group Command Line Access
sysadmin All CLI commands
ISP Most CLI commands including routing commands but
excluding cable commands.
MSO Most CLI commands including cable commands but
excluding routing commands.
Note: The show running-config command output identifies the user
account password with the number 0 if it is unencrypted. If the user account
password is encrypted, it is identified with the number 7.