Motorola BSR 2000, Руководство по настройке и управлению

Страница: 156 / 650

BSR 2000 Configuration and Management Guide Release 1.0
4-26 MGBI 526360-001-00 Rev. B
Figure 4-1 provides an overview of the SNMP access level configuration process and
the SNMP version (v1, v2c, or v3) that supports each snmp-server command.
Defining a Community Name
The community name access method, used predominantly with SNMPv1 and
SNMPv2, uses an SNMP Community Table that identifies those communities that
have read-only, read-write, or administrative permission to the SNMP MIB stored on
a particular server. You must define at least one SNMP community string. The
community string acts like a password to permit access to the SNMP Agent.
Optionally, you can specify one or more of the following characteristics associated
with the string:
■
An access list of IP addresses of the SNMP managers that are permitted to use the
community string to gain access to the agent.
■
A MIB view that defines the subset of all MIB objects accessible to the given
community. Refer to
Configuring a MIB View on page 4-30, later in this chapter.
■
Read-write or read-only permission for the MIB objects accessible to the
community.