Motorola APX 1000 Скачать руководство пользователя

Страница: 77 / 136

2.7.7

Sending An Emergency Alarm and Call with Hot Mic

This feature allows you to send an Emergency Alarm and Call with hot mic to a group of radios.

When and where to use:

Your radio must be programmed for this type of operation.

Follow the procedure to send Emergency Alarms and Call with hot mic on your radio.

Procedure:

Press the preprogrammed

Emergency

button.

If successful, the display shows

Emergency

on the current zone and channel. A tone sounds

and the LED blinks red momentarily.

The radio exits Emergency Alarm and enters the Emergency Call state when one of the
following scenarios occur:

• You receive the dispatcher acknowledgment. The display shows

Ack received

• You receive no acknowledgment. The display shows

No acknowledge

If unsuccessful, a tone sounds to indicate the selected channel does not support emergency and
rejects to launch emergency mode.

Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth.

The microphone remains active for the hot mic time specified in your radio's codeplug
programming.

To exit Emergency Call, press and hold the preprogrammed

Emergency

button.

Turning off the radio also cancels the emergency state.

2.7.8

Sending a Silent Emergency Alarm

When and where to use:

This feature allows you to send an Emergency Alarm to the system without

triggering any audio or visual indicators.

Procedure:

Press the preprogrammed

Emergency

button.

The display shows no changes, the LED does not light up, and you hear no tones. The silent
emergency state continues until you perform the next step.

Perform one of the following actions:

• Press and hold the preprogrammed

Emergency

button for about a second to exit the Silent

Emergency Alarm mode.

• Press and release the

PTT

button to exit the Silent Emergency Alarm mode and enter regular

dispatch or Emergency Call mode.

2.7.9

Change of Channels during Emergency

For ALL Emergency transmissions, when changing channels:

• If the new channel is also preprogrammed for Emergency, you can change channels while in

Emergency operation. The emergency alarm or call continues on the new channel.

MN000255A01-BL

Chapter 2: Advanced Features

Содержание APX 1000








































































































































Результаты поиска

Содержание APX 1000

Отзывы:

Похожие инструкции для APX 1000

Бренды по названию

Популярные бренды

Motorola APX 1000, Руководство пользователя

Результаты поиска

Содержание APX 1000

Отзывы:

Похожие инструкции для APX 1000

Бренды по названию

Популярные бренды