Motorola APX 1000 Скачать руководство пользователя | Manualshive

Страница: 106 / 136

background image

2.16

Over-the-Air Programming (POP 25, ASTRO 25, and ASTRO
Conventional)

This feature enables configuration data and firmware to be upgraded to your radio over-the-air. Full
use of the radio is retained during the data transfer without interrupting communication. For ASTRO 25
and ASTRO Conventional, the upgrade pauses to give priorities to voice call, and continues after the
voice call ended. For Wi-Fi, the upgrade process runs concurrently with voice calls.

Once a configuration upgrade is downloaded to your radio, you can install new changes immediately or
delay changes to be installed on the radio when it is being powered up.

Your radio can also be configured to allow you to accept or reject an upgrade.

NOTICE:

This feature must be preprogrammed by a qualified radio technician. Check with your

dealer or system administrator for more information.

2.16.1

Responding to the Notification of Upgrade

Procedure:

1

The display shows

Upgrade?

and two short, medium- pitched tones sound every 30 seconds

until the user makes a choice of either accepting, delaying, or rejecting the request.

2

Perform one of the following actions:

• Press the

Menu Select

button below

Acpt

to accept the request to upgrade immediately.

• Press the

Menu Select

button below

Dlay

to delay the request to upgrade.

• Press the

Menu Select

button below

Rej

to reject the request to upgrade.

One of the following scenarios occurs:

• If you choose to accept, the display shows

Programming Dont power off

to indicate the

upgrade is about to begin. The radio resets to install the upgrade. In the case of configuration data
upgrade, the process only takes a few seconds. In the case of firmware upgrade, the installation
takes several minutes.

NOTICE:

The radio cannot be used while the upgrade is being installed. Therefore, make

sure to only accept the upgrade at a convenient time when immediate radio use is not
required.

• If you choose to delay, a configuration data upgrade is installed automatically at the next power up.

However, in the case of a firmware upgrade, the radio prompts

Upgrade?

again at the next power

up.

• If you choose to reject, the display shows

Upg Aborted

. The radio continues to function with the

current configuration until it gets reprogrammed.

NOTICE:

If your radio has problems upgrading over-the-air, consult a qualified technician for

details.

2.17

Voice Announcement

This feature enables the radio to audibly indicate the current feature mode, zone, or channel the user
has just been assigned to. This feature is useful when you have difficulty reading the content on the
display.

If preprogrammed by a qualified radio technician, the following occurs:

MN000255A01-BL
Chapter 2: Advanced Features

106

«
...
104
105
106
107
108
...
»

Содержание APX 1000









































































































































Отзывы:

Нет отзывов

Похожие инструкции для APX 1000

Бренд: B&G Страницы: 129

Бренд: Clas Ohlson Страницы: 4

Fulbourn II FUL-DAB-BLK-2

Бренд: MAJORITY Страницы: 27

SONUS-1 SONUS-1XT

Бренд: Pure Digital Страницы: 20

Land of B. Lolo & Woofer Walkie-Talkies

Бренд: B.toys Страницы: 2

Бренд: auna Страницы: 152

Бренд: Retevis Страницы: 9

Бренд: ToooAir Страницы: 2

Бренд: Sangean Страницы: 80

Бренд: Caliber Страницы: 18

Бренд: Telefunken Страницы: 16

Бренд: SenHaiX Страницы: 7

Бренд: Entel Страницы: 4

Бренд: Garmin Страницы: 28

VHF 300 - Marine Radio

Бренд: Garmin Страницы: 6

Бренд: Infinition Страницы: 16

Бренд: Hitachi Страницы: 12

Бренд: Hitachi Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды