Dynamic Priority (Conventional Only)
Allows any channel in a Scan List (except for the Priority-One channel) to temporarily replace the
Priority-Two channel.
Emergency
Depending on the programming, initiates or cancels an emergency alarm or call.
Internet Protocol Address
Displays the Internet Protocol (IP) address, device name, and status of the radio.
Location
Determines the current location (latitude, longitude, time, and date), and also the distance and
bearing to another location or turns the GPS functionality on or off for all locations.
Message
Enters the current message list.
Mode Select
Long-press programs a button with the current zone and channel of the radio; once programmed,
the short-press of that button changes the radio zone channel to the programmed zone and
channel.
Monitor (Conventional Only)
Monitors a selected channel for all radio traffic until the function is disabled.
Multiple Private Line (Conventional Only)
Selects the Multiple Private Line lists.
Nuisance Delete
Temporarily removes an unwanted channel, except for priority channels or the designated transmit
channel from the scan list.
Phone
Allows you to make and receive calls similar to standard phone calls.
Private Call (Trunking Only)
Allows a call from one individual radio to another.
Private Line Defeat (Conventional Only)
Overrides any coded squelch (DPL or PL) that is preprogrammed to a channel.
Private Line Disable
Allows you to adjust the desired squelch level of the radio.
Priority Dispatch
Allows you to call the dispatcher on a different talkgroup.
Query
Launches a list of predefined short text messages only after successfully logged in the two-Factor
Authentication.
Radio Profiles
Allows easy access to a set of preprogrammed visual and audio settings of the radio.
Recent Calls
Allows easy access to the list of calls recently received or made.
Repeater Access Button (RAB) (Conventional Only)
Allows you to manually send a repeater access codeword.
Reprogram Request (Trunking Only)
Notifies the dispatcher that a new dynamic regrouping assignment is needed.
Request-To-Talk (Conventional Only)
Notifies the dispatcher that you want to send a voice call.
MN000255A01-BL
Radio Controls
30
