Motorola 49901 - Vanguard 340 Router, Инструкция по эксплуатации

Страница: 68 / 121

3-10 Installation and Replacement
Configuring the Serial Interface
Setting the Interface Options
Introduction This section provides instruction for setting the Interface Options parameter.
V.24 Interface Type Use this procedure to set the Interface Options parameter for V.24 interface type:
Step Action Result/Description
1 From the Control Terminal
Port Main menu, select
Configure -> Port
.
The Port record appears.
2
In the Port Number parame-
ter, type
3 , then press
ENTER.
Port 3 is selected.
3 In the Port Type parameter,
type
FRI
, then press
ENTER
This defines Port 3 type as FRI.
4
In the Interface Type
parameter, type
V.24 , and
then press ENTER.
The interface is set to V.24
5 In the Interface Options
parameter, type a
?
, and
then press ENTER.
The Range and Default appears:
Range = RI, TM
Default = RI
Specify the Pin 22 option:
RI - V.24 uses Pin 22 for Ring
Indicator output signal
TM - V.24 uses Pin 22 for Test Mode
input signal
6 Select either
RI
or
TM
for
the Interface Option.
When RI is selected, the output signal is
Ring Indicator.
When TM is selected, the input signal is
Test Mode.