Notice (continued)
Proprietary Material
Information and software in this document are proprietary to VanguardMS Inc. (or its
Suppliers) and without the express prior permission of an officer of VanguardMS Inc., may
not be copied, reproduced, disclosed to others, published, or used, in whole or in part, for
any purpose other than that for which it is being made available. Use of software described in
this document is subject to the terms and conditions of the VanguardMS Software License
Agreement.
This document is for information purposes only and is subject to change without notice.
Radio Frequency Interference Regulations
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules, CISPR22 and EN55022. These limits are
designed to provide reasonable protection against interference when the equipment is
operated in a residential environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications.
Changes or modifications not expressly approved by VanguardMS could void the user's
authority to operate the equipment.
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations.
This is a Class B product. Operation of this equipment in a residential environment may
cause radio interference, in which case the user may be required to take adequate measures to
correct the interference at his/her own expense.
This product was verified under test conditions that included the use of shielded DTE
cable(s). A cable equipped with a ferrite bead may also have been used. Use of different
cables will invalidate verification and increase the risk of causing interference to radio and
TV reception.
You can obtain the proper cables from Vanguard Managed Solutions.
Telecommunications Regulations
Equipment that complies with Part 68 of the FCC rules includes a label or permanent
marking on the printed circuit board that connects to the network that contains, among other
information, the FCC registration number and ringer equivalence number (REN) for this
equipment. If requested, this information must be provided to the telephone company. A plug
and jack used to connect this equipment to the premises wiring and telephone network must
comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A
compliant telephone cord and modular plug is provided with this product. It is designed to be
connected to a compatible modular jack that is also compliant. See installation instructions
for details.
Содержание 49901 - Vanguard 340 Router
