Motorola 49901 - Vanguard 340 Router, Инструкция по эксплуатации

Страница: 24 / 121

1-4 About the Vanguard 340 and 340 Enhanced
Features and Functionality
Features and Functionality
Introduction
This section describes the features available with your Vanguard 340 and 340
Enhanced device. For descriptions of the software running on your Vanguard, refer
to the appropriate protocol document. These documents can be found on the
VanguardMS Web site:
http://www.vanguardms/support/documentation/
Vanguard 340 and
340 Enhanced
Comparison Chart
The table below lists the different features for each product.
Standard Features
on the 340 The standard Vanguard 340 provides these features:
• Low Profile enclosure with rear accessible motherboard, and support for two
Vanguard Daughtercards
• 50 Mhz MPC860T PowerPC processor
• 4 Megabytes of Non-Volatile FLASH on board
• 4 to 8 Megabytes FLASH SIMM (optional)
• 16 Megabytes of SDRAM DIMM (expandable to 32 Megabytes - optional)
• Standard rear panel ports include:
- Two daughtercard ports
- One serial interface DB25 port supporting V.24, V.35, V.36, V.11/X.21
interfaces
- One Async (RJ-45 connector) Control Terminal Port (CTP) for local and
remote configuration, and management
- One 10/100BaseT Ethernet port with auto-sensing
- Up to Eight Voice Ports
• Data Compression and Encryption SIMM slot (optional)
• External power supply 62945-01 (APS Model APS61ES-30)
Product
Name
LAN
Ports
Voice
Ports
Processor SDRAM
(MB)
FLASH
(MB)
Encryption Compression Power
Supply
340 1 1 to 8 MPC860T
9kpps
16 4/4 DCC DCC 50 Watts
340
Enhanced
1 1 to 6 MPC860P
13.5kpps
32 8/8 ECC Software 35 Watts