User Manual
rev.
1.1 of 16.12.2019
EN
Original manual
Fanmig J5 MOST
-2-
Thank you for purchasing a semi-automatic welding machine
Fanmig
by
MOST.
We do believe
that this product will meet your requirements. In order to ensure the correct use, all the safety
and operating instructions should be read before operating this device.
Table Of Contents
1. Health and Safety Manual
2. Maintenance
3. Technical description and operating conditions
4. Technical data
5. Device construction
6. Fanmig J5 control panel
7. MIG/MAG welding technique
8. LIFT TIG welding
9. MMA welding (coated electrode)
10. MIG/MAG welding faults
11. Electrical scheme
12. EU Declaration Of Conformity
13. Recycling
1. Health and Safety Manual
ATTENTION!
The device can not be used for the purpose of pipe
defrosting! Information included on icons located on the device.
Use and maintenance of welding equipment may be dangerous. The user must
observe health and safety rules and regulations. Welding and cutting machines
may be used only by qualified personnel. The national regulations for working
with this device and accident prevention should be kept up to date.
All flammable or combustible materials must be removed from the working area.
Welding inside tanks previously used as flammable substance storage is
forbidden. Place all combustible materials away from welding spatter.
Do not expose the device to rain or water vapour and do not spray water over it.
Do not weld without proper eye protection. Pay attention to providing safety for
bystanders against welding radiation.
Use ventilation and filters in order to remove welding fumes from the work site.
Use individual filters if the filtering/ventilation system does not operate correctly or
is not available.
