MOSA Weld MAGIC WELD 200, Руководство по эксплуатации и обслуживанию

Страница: 29 / 36

26/1
1/08 C0DN6000_EN
ENGLISH
ENGLISH
M
1.5
TECHNICAL DATA
REV
.0-12/19
D.C. WELDING MAGIC WELD 200
Current range, continuous 20 - 200A
Open circuit voltage 70V
Duty cycle 200 A - 60%
A.C. GENERATION 230 V 110 V
Single-phase output (max) 3 kVA / 230 V / 13 A - 50 Hz / 60 Hz 2 kVA / 110 V / 18.2A - 50 Hz / 60 Hz
Single-phase output (continuous) 2.5 kVA / 230 V / 10.9 A - 50 Hz / 60 Hz 1.8 kVA / 110 V / 16.4 A - 50 Hz / 60 Hz
Cos
ϕ
0.8 0.8
ALTERNATOR Self-excited, brushless
Type permanent magnet
Insulating class H
ENGINE
Mark / Model HONDA / GX 270 (STAGE V)
Type / Cooling system Gasoline 4-stroke OHV / Air
Cylinders / Displacement 1 / 270 cm
3
Output max 6.3 kW (8.5 HP)
Speed 3600 rpm
Fuel consumption (Welding 60%) 1.5 l/h
Engine oil capacity 1.1 l
Starter recoil
GENERAL SPECIFICATIONS
Tank capacity 5.3 l
Running time (Welding 60%) 3.5 h
Protection IP 23
*Dimensions / max. Lxlxh (mm) 630x490x540
*Weight 61 Kg
Acoustic power LwA (pressure LpA) 99 dB(A) (74 dB(A) @ 7 m)
* Dimensions and weight are inclusive of all parts.
POWER
Declared power according to ISO 3046-1 (temperature 25°C, 30% relative hummidity, altitude 100 m above sea level).
It’s admitted overload of 10% each hour every 12 h.
In an
approximative
way one reduces: of 1% every 100 m altitude and of 2.5% for every 5°C above 25°C.
ACOUSTIC POWER LEVEL
ATTENTION : The concrete risk due to the machine depends on the conditions in which it is used. Therefore, it is up to the end-
user and under his direct responsibility to make a correct evaluation of the same risk and to adopt specific precautions (for
instance, adopting a I.P.D. -Individual Protection Device)
Acoustic Noise Level (L
W
A) - Measure Unit dB(A) : it stands for acoustic noise released in a certain delay of time. This is not
submitted to the distance of measurement.
Acoustic Pressure (Lp) - Measure Unit dB(A) : it measures the pressure originated by sound waves emission. Its value changes
in proportion to the distance of measurement.
The here below table shows examples of acoustic pressure (Lp) at different distances from a machine with Acoustic Noise Level
( L
W
A ) of 95 dB(A)
Lp a 1 meter = 95 dB(A) - 8 dB(A) = 87 dB(A) Lp a 7 meters = 95 dB(A) - 25 dB(A) = 70 dB(A)
Lp a 4 meters = 95 dB(A) - 20 dB(A) = 75 dB(A) Lp a 10 meters = 95 dB(A) - 28 dB(A) = 67 dB(A)
PLEASE NOTE : the symbol when with acoustic noise values, indicates that the device respects noise emission limits
according to 2000/14/CE directive.
2000 / 14 / CE
29