MOSA Weld MAGIC WELD 200, Руководство по эксплуатации и обслуживанию

Страница: 16 / 36

13/09/18 M2-6 (TS) EN
ENGLISH
ENGLISH
If is needed to move the
welder machine be sure
that the engine is off, that
no electric connection is on
and that noone cable will
avoid to move the welder
machine.
The wrong loads distribution can cause
the instability of the vehicle and abnorma-
lities to wheel and components. In case of
transport need, use dedicated vehicle for
this purpose. The loads must be balan-
ced, fixed in order to guaranty the stability
of the vehicle. Do not exceed the max load suitable of the vehi -
cle with reference to axle, wheels, etc. Fix the base of welder
machine at the frame or platform observing the instruction of
the vehicle producer
INSTALLATION AND ADVICE BEFORE USE
The operator of the welder is responsible for the security of the
people who work with the welder and for those in the vicinity.
Before installing the welder machine, read the safety instruction
of this manual at the chapter 2.5.
Particulary remember:
- installing operation must be made by authorized and qualified
person.
- while installing operation use individual safety devices (shoes,
gloves, cap, etc.)
INSTALLATION
FIxINg
MOVINg THE WELDER MACHINE
INSTALLATION ON VEHICLE
ATTENTION
This equipment is designed for outdoor use. It
may be stored, but is not intended to be used
when welding outside during precipitation unless
sheltered
!
M
2.6
INSTALLATION AdvIceS
eNGINe dRIveN WeLdeR
REV
.0-09/18
DANgER
The machine must be positioned so that exhaust gas is dif -
fused without being inhaled by any living being.
Engine exhaust gas contains carbon monoxide, which is
harmful to one’s health, and in big quantities can cause in-
toxication and death.
Local norms in force have to be respected.
!
ATTENTION
A safe distance has to be kept between the machine and
fuel deposits, inflammable goods (cloths, paper, etc.), che -
micals, according to indications provided by the authority in
charge. In order to avoid potentially dangerous situations,
area surrounding genset should be isolated so that unau-
thorized people will not be able to get close to the unit. Even
if The machines are manufactured according to electroma-
gnetic compatibility norms, we suggest NOT to install the
genset near machinery that can be influenced by magnetic
fields.
!
Always instal the welder machine
on a hard and plan surface in order
to avoid rollovers, slips or falls whi-
le working;
avoid to use the welder machine
with slope more than 10°.
In order to absorb vibrations produced by gen-
set, it should be fixed to a surface with suffi -
cient rigidity, isolated against vibrations to-
wards other structures and with a mass equal
to at least three times the genset mass.
If such above could not be possible, be sure
that the welding machine do not move or slip
while working due to vibrations;
be care to fix the welder machine with dedica -
ted tools.
16