WHITEHALL MANUFACTURING
•
P.O. BOX 3527
•
City of Industry, CA 91744-0527 U.S.A.
Phone (800) 782-7706
•
(626) 968-6681
•
Fax (626) 855-4862
•
www.whitehallmfg.com
18
4.
–SL models with separate drain pump
(-SDP, Figure 11):
a. Place discharge nozzle (5) into floor drain or sink.
b. Turn the drain pump switch (18, Figure 4) on. When
water stops discharging from the nozzle, turn the
drain pump switch off.
c. Some residual water will remain in the drain pump.
To remove this water, lower the discharge nozzle (5)
to the floor and clean with a towel or sponge.
d. Any residual water in the tub may be removed by
sponge drying.
e. Place discharge nozzle (5) into socket (6). Note:
water will flow through hose if discharge nozzle (5) is
lower than water level.
Figure 11: -SL Whirlpool with separate drain
pump (-SDP)
