WHITEHALL MANUFACTURING
•
P.O. BOX 3527
•
City of Industry, CA 91744-0527 U.S.A.
Phone (800) 782-7706
•
(626) 968-6681
•
Fax (626) 855-4862
•
www.whitehallmfg.com
15
NOTE: The turbine assembly can weigh as much as 22 kg
(48 lbs). It is recommended that 2 people mount the turbine
assembly onto the tub.
To install the turbine
(3) onto tub,
1. (Figure 3) Loosen handle (5) then lower turbine support
rod (6) into turbine support tube. Tighten handle (5)
when turbine is at desired height.
2. For
–SL models (Figure 5) and -SL-SDP models (Figure
4): Place discharge nozzle (5) into storage socket (6).
For
–SL-SDP models only: water will flow through hose if
discharge nozzle (5) is lower than water level.
3. Turn the pressure control valve handle (11) fully
clockwise, then fully counterclockwise to completely
lubricate the plunger assembly.
4. For
–SL–SDP models only (Figure 4): Insert electrical
cord twist-lock plug (7) into socket (9) and turn clockwise
a quarter turn to lock in place.
5. Turn the turbine power switch (13) off.
6. Plug Whirlpool power cord into medical-grade GFCI
outlet.
Figure 3: Installing the turbine on the tub. –S
model with standard drain and overflow shown.
Figure 4: Detail of –SL-SDP Whirlpools
Figure 5: Detail of -SL model
without -SDP
