WHITEHALL MANUFACTURING
•
P.O. BOX 3527
•
City of Industry, CA 91744-0527 U.S.A.
Phone (800) 782-7706
•
(626) 968-6681
•
Fax (626) 855-4862
•
www.whitehallmfg.com
16
Operating Instructions
Refer to warnings on page 5 before operating the Whirlpool.
1. Ensure Whirlpool power cord is plugged into
medical-grade GFCI outlet.
2. Fill tub with water so that the bottom of turbine is at
least 15.2 cm (6 inches) below surface of water.
3. Turn the pressure control valve handle (11) fully
clockwise. This will generate maximum water
circulation.
4. Turn the turbine power switch (13) on.
5. Adjust position of turbine by slowly pushing down on
and rotating the top of the motor support casting (14)
until the bottom of the turbine (12) is at the desired
location. Tighten handle (5) to lock in place.
6. Adjust pressure control valve handle (11) to change
level of water circulation.
7. Turn the turbine power switch (13) off to stop
circulation.
8. To electrically isolate the Whirlpool from supply
mains, simply unplug the Whirlpool at the wall outlet,
if required.
Figure 6: Operating the Whirlpool. -S model
with -SDO option shown.
