Morningstar TriStar TS-MPPT-30, Инструкция по установке и эксплуатации

Страница: 53 / 68

53 TriStar MPPT Operator’s Manual
Factory Default Network Settings
DHCP enabled
Live View Web Address http:// serial number **
IP 192.168.1.253 (if DHCP is not enabled)
Subnet Mask 255.255.255.0
Gateway 192.168.1.1
Primary DNS Server 169.254.1.1
MODBUS TCP/IP
TM
Port 502
** The Live View web address is unique to each controller. If the TriStar MPPT serial number is 09501234, then the Live View ad-
dress is: http://tsmppt09501234. The Live View address is printed on the serial label on the side of the unit for reference.
The controller’s MAC Address is located on the serial label on the side of the controller.
Two (2) LED’s on the Ethernet jack indicate link and activity status.
Condition Green LED Yellow LED
Network Connection OK ON OFF
Network Activity ON Blinking
Error OFF ON
W eb Pages
Connect the TriStar MPPT controller to the network using an Ethernet cable. Wait 5 to 10 min-
utes for the controller to connect to the network. Open a web browser on any PC on the network.
Enter the Live View web address in the address bar of the web browser. The TriStar MPPT main
Live View webpage will load. Links are provided to real-time data, history, and network settings
adjustment pages.
Pages served by the TriStar MPPT are ideal for retrieving quick information about the charge
controller and making adjustments to network settings. However, there is no ability to custom-
ize the layout or data displayed. Also, information from multiple controllers cannot be displayed
on the same webpage. Custom web pages can be created to format and display data exactly as
needed. Custom web pages can be served from a webserver. Further, websites can be created
to display data from multiple controllers. Examples and sample code are available on our web-
site.
Custom Settings
The
TriStar MPPT Setup Wizard
in MSView TM provides an interface to adjust all operating param-
eters. Morningstar’s MSView
TM
PC software can connect to any TriStar MPPT on the Ethernet
network or through a RS-232 serial connection. Refer to the help documentation included with
MSView
TM
for more information.