Morita Lubrina HIM-1 Скачать руководство пользователя страница 4

Operation  2018-05-21 

2

 

ATTENTION CUSTOMERS

 

 

Do not fail to receive clear instructions concerning the various ways to use this 
equipment as described in this accompanying Operator’s Manual. 
Fill out and sign the warranty and give a copy to the dealer from whom you purchased 
the equipment.

 

 

ATTENTION DEALERS 

 

Do not fail to give clear instructions concerning the various ways to use this equipment 
as described in this accompanying Operator’s Manual. 
After instructing the customer in the operation of the equipment, have the customer fill 
out and sign the warranty.    Then fill in your own section of the warranty and give a 
copy to the customer.    Do not fail to send the manufacturer’s copy to your local 
J. MORITA OFFICE.

 

 

 

PREVENT ACCIDENTS 

Most operation and maintenance problems result from insufficient attention being paid to basic safety precautions 
and not being able to foresee the possibilities of accidents.    Problems and accidents are best avoided by foreseeing 
the possibility of danger and operating the unit in accordance with the manufacturer’s recommendations.    First 
thoroughly read all precautions and instructions pertaining to safety and accident prevention; then, operate the 
equipment with the utmost caution to prevent either damaging the equipment itself or causing bodily injury. 

 

Note the meaning of the following symbols and expressions: 

 

This warns the user of danger of death, serious bodily injury or total equipment 
damage and failure or fire.

 

 

This identifies methods which must not be used or purposes which the 
instrument is not suited for.

 

 

This alerts the user to the risk of light to medium injury or equipment damage.

 

 

This alerts the user of important points concerning operation.

 

 

The user (e.g., healthcare facility, clinic, hospital etc.) is responsible for the management, maintenance and use of 
medical devices.    Also this equipment must not be used by anyone except legally qualified dentist, doctor, or other 
legally qualified professional. 

 

Do not use this equipment for anything other than its specified dental treatment purpose. 

 
 

 Prescription 

Device 

 

CAUTION: Federal law restricts this device to sale by or on the order of a dentist. (U.S.A.) 

 

Содержание Lubrina HIM-1









































Отзывы: