Morita Lubrina HIM-1, Руководство по эксплуатации, Страница: 24 / 40

Operation 2017-12-27 22
Turn the main switch off after use.
The power lamp will go out.

Do not fail to turn off the main switch after use.

If the unit will not be used for a while, unplug it and close
the main air valve.
Change Lubrication Mode (time)
* The Lubrina can be used with sprays other than those made by Morita. To do this the stand for the spray
can and the coupling must be replaced.
Change the lubrication time for other sprays in the following way.
There are three lubrication modes: the short mode (with less oil), the long mode (with more oil), and the long
blow-out mode (to remove excess oil more thoroughly).
Short Mode
* For less oil
The selector switch lamp blinks at 0.3 second intervals.
Lubrication time for one handpiece is about 25 seconds.
Long Mode
* For more oil
The selector switch lamp blinks at 1.0 second intervals.
Lubrication time for one handpiece is about 25 seconds.
Long Blow-out Mode
* To remove excess oil more thoroughly
The selector switch lamp blinks at 2.0 second intervals.
Lubrication time for one handpiece is about 120 seconds.
This mode blows out excess oil for a longer time after the short mode completes
the oiling procedure.
♦ For some types of spray cans, the long setting will supply too much oil and it will spray out of the head.