Morita Lubrina HIM-1, Руководство по эксплуатации, Страница: 13 / 40

Operation 2018-05-21 11
4. Set Up
* Direct inquires concerning types of couplings, sprays (AR
SPRAY, MORITA MULTI SPRAY, etc.), and spray can
stands to your local dealer or J. MORITA OFFICE.

Explosion Hazard. Do not use near open flames or other
ignition sources.

Use only spray provided by J. MORITA.

Health Hazard. The area must be well ventilated.
Breathing fumes could damage your health.

The equipment must be properly grounded.
Set the unit on a level and stable surface.
♦ Leave at least 5 cm of free, open space around the unit.
(1) Air Connection
1. Connect the green air tube provided to the air regulator and
the main air supply.
Open the valve for the main air supply.
♦ The main air supply must be clean and oil-free.
♦ Make sure the tube is securely connected.
2. Set the air regulator dial between 0.3 and 0.5 MPa.
Pull the dial up to unlock it. Push it back down after
setting the pressure.
*
Recommended Air Pressure is 0.35 MPa.
♦ Less than 0.3 MPa will result in poor performance.
♦ More than 0.5 MPa could result in damage.
Depending on the type of handpiece and coupling, there could
be a release of oil mist. In this case, lower the pressure to 0.3
MPa.
Air Regulator
Air Tube
Connector
Air Regulator Dial