Morita Lubrina HIM-1, Руководство по эксплуатации, Страница: 14 / 40

Operation 2018-05-21 12
(2) Power Cord
Connect one end of the power cord to the main unit and plug
the other end into a standard
receptacle .

Make sure the ground is properly connected.

Do not place things around the power input plug at any
time so that the equipment can be cut off from the supply
mains when necessary.

Do not place this equipment where the main switch cannot
be operated.
(3) Coupling
Fit the coupling onto the nozzle and tighten up its nut.
♦ Make sure the nut is properly tightened. Otherwise oil and
air will escape and the maintenance will not be properly
performed.
(4) Oil Pad
Put an oil pad in its case and install the case.
Nut
Oil Pad
Oil Case
Cord Connector
Power Cord