33
Code
Description
Cause
Operations to be performed
Solutions
Er39
Turn off due to
flowmeter error
FLOWMETER INCORRECTLY
CONNECTED OR BROKEN
Unblock and turn on the stove
If the error persists, contact an
authorised technician
Er41
Turn off due to mini-
mum air flow in Check
Up or in Normal and
Modulation not achie-
ved
FLOWMETER INCORRECTLY
CONNECTED OR BROKEN
Unblock and turn on the stove
If the error persists, contact an
authorised technician
Er42
Turn off due to maxi-
mum airflow excee-
ded
INCORRECT READING FROM
PART OF FLOW METER
Unblock and turn on the stove
If the error persists, contact an
authorised technician
Er44
Turn off because of
open front door or
open pellet door
FRONT DOOR OR PELLET DOOR
OPEN FOR MORE THAN 120 SE-
CONDS
Unlock and check if the doors have
been closed correctly
If the error persists, contact an
authorised technician
Er47
Turn off due to lack of
Auger Encoder signal
NO ENCODER SIGNAL
Unlock and turn on again, if the
error recurs, the auger motor or
control unit is broken
If the error persists, contact an
authorised technician
Er48
Turn off due to unsuc-
cessful speed regula-
tion Auger Encoder
NON
-
REGULATING ENCODER
Unlock and turn on again, if the
error recurs, the auger motor or
control unit is broken
If the error persists, contact an
authorised technician
Service
Acoustic alarm
MESSAGE THAT INDICATES THE
ACHIEVEMENT OF THE SCHED-
ULED FUNCTIONING HOURS
The stove needs a maintenance
and cleaning procedure
If the error persists, contact an
authorised technician
EN
