Moore Tandem Uni-Drill DP400A, Инструкция по эксплуатации

Страница: 30 / 66

Settings
F : Half Width Shut off
c)
d)
The hopper must be emptied after work, to avoid rodent damage.
c)
Half-seed drill disengagement
-
Only the right side is declutchable.
-
Remove the clip. Pull lever (1) and put clip (2) back in place.
-
After completing your ½ pass, do not forget to re-engage the lever. Make sure both shafts
are rotating again.
d)
Emptying the hopper
-The hopper is emptied into tray (3)
-
Position the tray under distribution and lower lever (4) all the way downwards.
-
To stop seed flow while the hopper is not empty, slightly raise the lever without seeking to
put it in the top position.
-For faster emptying, levers (5) can be used.
-
Set the seed drill to transport position
-
Place a container under the distribution hoses.
-
Pull levers (5)
-
Take care to lock those levers with the pins after use.
30