Moore Tandem Uni-Drill DP400A, Инструкция по эксплуатации

Страница: 22 / 66

Settings
A : Distribution Settings
For very accurate sowing, a flow rate test must be carried out. Check the precision of your scales.
Setting up the calibration test
•
Use accurate scales and a container.
•
Before carrying out the test, check that there is no-one around the seed drill.
•
Procedure:
a) Remove the wheels (1)
b) Push the injectors (2)
c) Put the trough (3) beneath the metering device
d) Fit the crank (4) on to the variator shaft
•
Check that the metering devices used are engaged.
•
Perform the flow rate test with both trays and according to the recommendations of the following pages.
•
Close the injectors.
•
Bring the trough back to the guard position.
•
NOTE:
It is possible to do the test on one side only by disengaging the left half-distribution system. The amount
of seed collected in kg will have to be doubled.
22