The Interface Solution Experts
7
FDY
PC-Programmable Frequency
Transmitter and Display
PC Confi guration Software
The FDY PC Confi guration Software is used to
program all of the FDY’s parameters. For detailed
information on how to use our confi guration software,
access our HelpMap Navigation System. The PC
Software is made up of these sections:
1.
Program Status & Device ID
–The
Program
Status
portion of the screen displays the activity of
the connected unit. It will show you if the unit is
Idle
,
Uploading
,
Downloading
or
Monitoring
.
Device ID
displays the type of device that is being polled and its
ID number.
2.
Tag/Descriptor/Message
–These boxes are used
to program a FDY with an individual tag, descriptor or
message used for easily identifying the unit. The
Programmed Date
stores the last time that the unit’s
confi guration was updated.
3.
Device Confi guration
–Displays the current
confi guration of the attached FDY.
4.
Measurement Mode
–The drop-down menu selects
which type of measurement the FDY will monitor.
5.
Variables/Device Status/Communications
–
These sections display the status of the FDY and its
process. The
Variables
section displays the input
to the FDY, FDY output and the percent of span.
The
Device Status
provides advanced diagnostic
information on the FDY. The
Communications
box
displays the status of the FDY’s communication with
the PC Program.
6.
Input/Range/Output/Trimming/Custom Curve
Tabs
–These tabs change the right side of the screen
to allow you to set the appropriate part of the FDY’s
confi guration. See corresponding sections of this
manual for additional information on these tabs.
7.
Quickset Buttons
–These buttons
allow you to program just one part of the FDY’s
confi guration program. From left to right, they
program:
Fail Mode
,
Display Mode
,
Tag
and
Message
.
Figure 4.
D-BOX Enclosure Dimensions
4mm
3.3 in
11 mm
4.65 in
13 mm
5.12 in
INST M NT
T
116mm
4.56 in
27mm
1. 5 in
C ND IT
FITTIN
C
DY
1mm
3.2 in
FDY
C M
PS
–
–PS
6027.8
H Z
