Moore Industries TDZ, Руководство по установке

Страница: 13 / 32

The Interface Solution Experts 9
THZ & TDZ
Figure 8. D-BOX Housing Dimensions (For use with the TDZ)
84mm
(3.31 in)
118mm
(4.65 in)
130mm
(5.12 in)
112mm
(4.41 in)
83mm
(3.27 in)
64mm
(2.52 in)
CL
Interior Diameter
81mm (3.2 in)
Instrument
Tag
116mm
(4.57 in)
27mm
(1.06 in)
Conduit
Fitting
Cover
Body
Bezel
Configuring a THZ or TDZ
One of the benefits of these transmitters is that there
are no internal or external controls to adjust or settings
to change. All operating parameters are set using
either a HART Communicator or a PC and Moore
Industries' Intelligent PC Configuration software.
The software settings are "downloaded" to the trans-
mitter in the form of a Configuration File and stored
in the instruments’ memory. You can save a backup
copy of the file on your PC hard drive or disk. The
transmitter communicates with the PC through a
HART modem connection to the PC’s serial port.
You can configure the THZ or TDZ with either a
standard HART Communicator or our PC software.
Figure 10 and Table 5 provide the information you
need to configure your unit.
Using a PC...
If you are going to use a PC to configure your unit,
first install the software as described on the next
page, then setup the hardware as shown in
Figure 10. Use our comprehensive HelpMap
Navigation System in the PC Configuration Program
for further instructions on setting up your THZ or
TDZ.
Note:
To use the HelpMap Navigation System, click on the
button OR click on HELP, then HelpMap on the
command bar to start this advanced help tool .