Moore Industries TDZ, Руководство по установке

Страница: 17 / 32

The Interface Solution Experts 13
THZ & TDZ
Using the HART Communicator
The THZ and TDZ can be programmed using a HART
Communicator. If your communicator is equipped
with the Device Description (DD) for your transmit-
ter, the following section, “The HART Communicator
Menu with a Device Description”, gives an overview
of the menus and instructions for programming.
The THZ and TDZ DD is available on the HART
Foundation’s Device Driver Library Release October
1999 and later. To determine if your communicator
has the appropriate Device Description, press “1” to
select “Offline” and press “1” again to select “New
Configuration”. A list of companies will appear which
will include Moore Industries if you have the appro-
priate Device Description.
If your communicator is
not equipped with the Device
Description that you need, go to “The HART Commu-
nicator Menu without a Device Description” on page
17. Some capabilities can only be accessed if your
communicator is equipped with a Device Description.
Moore Industries can factory-configure parameters
that are not accessible through the generic DD.
Moore Industries can update your HART Communi-
cator with all of the latest, approved HART Device
Descriptions, including the DD for the THZ or TDZ.
Just send your communicator to our Interface Solu-
tion Center headquarters in Sepulveda, California
with our configuration sheet indicating the DD’s you
need. We'll load the Device Descriptions of your
choice for a nominal charge.
Programming when a Device Description
is Available
With the transmitter connected as illustrated in
Figure 10, apply power and turn the communicator
on. After a brief self-test, the communicator will
show the main menu and identify the unit as a
THZ or TDZ.
This section contains the instructions for program-
ming the transmitter using a HART Communicator
that has been programmed with a HART Device De-
scription (See pages 14 & 15). If your communicator
doesn’t have the appropriate Device Description,
skip to “The HART Communicator Menu without a
Device Description” on pages 16 & 17.
Figure 11 on the next page shows an overview of the
programming menus for the configuration process.
This figure will be used frequently.