Moog GAT Rotopack BAT, Руководство по эксплуатации

Страница: 7 / 27

Electric power
DANGER!
Danger to life from electric power!
As a Rotokombi, the device can be com-
bined with slip rings which carry current. If
live parts of the device are touched, there
is immediate danger to life from electric
shock. Damage to the insulation or indi-
vidual components can be life threatening.
– Only allow work on the electrical
system to be performed by an electri-
cian.
– In case of damage to the insulation,
switch off the voltage supply immedi-
ately and initiate repair.
– Before beginning work on active parts
of electrical systems and equipment,
de-energise and secure for the dura-
tion of the work.
– Keep humidity away from energised
parts. This can cause short-circuiting.
Rotating parts
WARNING!
Danger of injury due to rotating parts!
Rotating parts of the device Severe inju-
ries can result from pulling in, winding up
or catching.
– Do not reach into or hang on rotating
parts during operation.
– Before all work near the rotating parts,
bring the movements to a standstill and
secure against switching on.
– In the danger zone, wear close-fitting
protective clothing with low tear
strength.
Rotokombi
WARNING!
Danger of injury due to rotating parts!
Due to the combination of several rotating
components and their torque supports,
there may be new hazard points which can
cause crushing.
See also required operating instructions
for the Rotokombi sealing system in ques-
tion.
– Perform risk assessment.
– If necessary, install or adapt separating
protective device.
– See the other required operating
instructions for the Rotokombi sealing
system in question (Rotopack, Roto-
stat, etc.).
Pneumatic system
WARNING!
Danger of injury due to pneumatic
energy!
Escaping compressed air can cause
extremely severe injuries.
– Only allow work on the pneumatic
system to be performed by a pneu-
matic expert.
– Before beginning work on the pneu-
matic system, de-pressurise it com-
pletely. Completely de-pressurise pres-
sure accumulator.
– Always heed the specification of the
maximum pressure for the device. In
case of higher than expected pressure
levels, do not put the device into opera-
tion.
Rotopack • Operating instructions
7