© MOOG 2019
This document is subject to MOOG INTELLECTUAL AND PROPRIETARY INFORMATION LEGEND . The details are on page II.
49
MRJ06301
Figure 2-7 Ten key on the screen (1)
Figure 2-8 Ten key on the screen (2)
If you press the "10 Keys" switch from the state shown in Figure 2-7, or touch the selected parameter
again from the state of Figure 2-6, the numeric keypad becomes active as shown in Figure 2-8. You can
enter a value with the numeric keypad. When you use the numeric keypad, the original value is cleared.
For example, pressing "1" changes the value to 1. After that, when you use the rotary knob, the value
increases or decreases based on that value.
If you press "ESC" or touch anything other than the numeric keypad area, the screen will return to Figure
2-6 without changing the value. Press the "SET" key to update the value and return to Figure 2-6. Also,
when the numeric keypad is active, pressing the [C] key clears the input contents and can re-enter. I will
explain the rules for entering 10 keys on the next page.
Selected value zoomed
At this stage
the numeric
keypad is still
translucent
and can not
be entered
Active numeric
keypad
10 key switch
