MONTAGUE FB-108-R, Инструкция по эксплуатации

Страница: 16 / 33

SERVICE
Condensing Coil
ACCESSING CONDENSING COIL
Condenser Coil should be cleaned regularly to
allow air circulation that will ensure proper
operation and efficiency. Failure to clean the coil
at regular intervals can cause compressor
failure and/or malfunction and will void the
warranty. A minimum of a monthly cleaning is
required.
(See operating instructions to prevent premature
failure of components.)
NOTE: CONDENSER COIL FINS SHOULD BE
STRAIGHTEND IF NECESSARY TO ALLOW
PROPER AIR CIRCULATION
WARNING: ANY SERVICE TO THE
CONDENSING UNIT MUST BE PERFORMED
BY AN AUTHORIZED & TRAINED SERVICE
TECHNICIAN
ACCESSING CONDENSING UNIT
To access the condensing unit, remove the
screws (shown in photo) mounting the
condensing guard to the condenser cabinet.
Once the condensing unit is exposed, remove 3
screws in the condensing unit base. 2 screws
are located in the front of the base and the third
is located at the right rear of the base.
11