MONTAGUE FB-108-R, Инструкция по эксплуатации

Страница: 9 / 33

SERVICE
USING THE CAREL DIGITAL CONTROLLER
1. Up arrow button / Power button
2. Set button
3. Down arrow button
“OPERATIONAL” MODE
When the digital controller is running, the
temperature of the refrigerated base will be
displayed as shown in the photo.
ATTENTION: When you are ready to verify
the temperatures set point and / or make
adjustments please use the following steps :
“TEMPERATURE SET POINT” MODE
1. Hold down the “set” button (#2) for two
seconds until a flashing temperature is
shown. This parameter should be set to
“35.0” which will reflect your temperature
set point.
2. If an adjustment needs to be made to the set
temperature, use the
“up arrow” button (#1)
or the “down arrow” button (#3) to adjust the
temperature. Press the “set” button (#2) to
save your adjustment. The display will again
show the temperature of the refrigerated
base.
“OFF” MODE
If for any reason your digital controller is
displaying a flashing
“Temperature / OFF” your
digital controller is in “OFF” mode. To return to
the “ON” mode, press and hold the “Up Arrow”
button (#1) for five seconds and the display will
show the current refrigerated base temperature
only.
REFRIGERATION - MEDIUM TEMP
4