MONTAGUE 136W36', Инструкция по эксплуатации

Страница: 19 / 36

SERVICE
PARTS REMOVAL & REPLACEMENT
PROCEDURES
Perform the following procedures to remove
and replace parts. To eliminate mistakes when
ordering parts, always provide the following
information:
Model Number
Serial Number
These numbers are located on the nameplate.
CAUTION
TURN OFF THE BROILER GAS VALVE AND
ALLOW BROILER TO COOL BEFORE
REMOVING ANY COMPONENTS
Cover & Panels
CAUTION
TURN OFF THE GAS SUPPLY AT THE
MANUAL SHUTOFF VALVE THAT IS NEXT
TO THE BROILER BEFORE ATTEMPTING
TO LOOSEN ANY GAS CONNECTIONS.
VENTURI COVER
Removal of the venture cover provides access
to the air shutters, pilots, and main burner
orifices.
1. Remove the two screws under the front
edge of the venturi cover.
2. Lift the venturi cover from the broiler.
Venturi Cover
(Figure 13)
Control Panel Cover
Removal of the control panel cover provides
access to the burner valves, pilot valves and
carriage springs.
1. Turn the control valves to the full off
position, then remove the control valve
knobs.
2. Remove the two screws from the front of
the control panel.
Control Panel Cover
(Figure 14)
17
Venturi Cover Screws
Burner Valve Knobs Screws