VACUUM
PJ27078,000002E -19-08MAR19-1/2
PJ27078,000002E -19-08MAR19-2/2
Vacuum Gauge Settings
All Monosem planters are equipped with a vacuum
gauge that allows you to read the vacuum level of the
turbofan. The vacuum level should be set depending on
the weight and size of the seed to be planted. Planters
with 2 turbofans may be equipped with 2 vacuum gauges.
Vacuum gauge settings are shown below in inches of
water column.
Seeds Size
Seeds Examples
Vacuum Gauge
Setting (inches of
water column)
Small Seeds
Sugarbeet, Pickle,
Canola, Cabbage,
Collard Greens
15"-20"
Medium Seeds
Corn, Soybeans,
Cotton, Pumpkin,
Squash
20"-25"
Large Seeds
Kidney Beans, Fava
Beans, Peanuts
25"-30"
APY18006
—UN—05MAR19
APY18007
—UN—05MAR19
To set the vacuum level for PTO and Hydraulic drive:
It is not necessary to have to reset vacuum levels daily.
Vacuum levels will be slightly lower during tractor and
pump start-up.
1. Use the recommended vacuum settings above, or
consult your Monosem dealer.
2. Engage PTO or push tractor lever/switch to start oil
flow to hydraulically driven turbofan and let oil warm up.
3. With some seed in the hoppers, turn drive wheels by
hand or lower planter to engage drive wheels and
drive forward a short distance to fill cells on seed discs
with seed. This will result in the most accurate setting
for the vacuum.
4. Re-adjust the PTO speed or oil flow, if necessary, until
the desired vacuum level is obtained on the vacuum
gauge.
APY18008
—UN—05MAR19
40-5
061919
Содержание 7x7 NG Plus 4 Series
