Monosem 7x7 NG Plus 4 Series, Руководство оператора и каталог запасных частей

Страница: 19 / 94

Safety
HS35416,0000A76 -19-01JAN19-1/1
HS35416,0000A77 -19-01JAN19-1/1
HS35416,0000A78 -19-01JAN19-1/1
FOLLOWING OPERATION
• When you stop operation of the planter, even if
periodically, stop the tractor, set the tractor or towing
vehicle brakes, disengage the PTO and all power drives,
shut off the engine and remove the ignition key.
T81389
—UN—28JUN13
UNHOOKING THE PLANTER
Lower the toolbar stands to support the planter. Do
not stand between the tractor and the planter when
connecting or disconnecting the implement.
Before unhooking the planter from the tractor, fully extend
the jack stands to the point where the toolbar will remain
level. Lock the stands securely in place with the locking
pins.
Lower the planter to the ground. Set the tractor or towing
vehicle brakes, disengage PTO and all power drives, shut
off the engine and remove the ignition key.
Unhook the tractor lift arms from hitch pockets and
remove center link. If a quick attach is used, position
levers so that the locking mechanism is in the “unlatched”
position and lower.
T81389
—UN—28JUN13
When the lift arms or quick attach arms are clear of the
tractor, slowly drive the tractor away from the planter.
STORING THE PLANTER
Store the planter on a dry, level surface. An uneven
surface could cause the planter to shift or fall, resulting
in injury or death. Store planter in an area away from
human activity.
Do not permit children to play on or around the stored
planter.
The planter should be stored in a dry and dust-free
location with the hydraulic cylinders closed.
Engage all safety devices for storage.
You may need wheel chocks to prevent the parked planter
from rolling.
Never work under the planter while in raised position
without installing safety lockup pin
T81389
—UN—28JUN13
05-13 061919