Monoprice 43363, Руководство пользователя

Страница: 40 / 45

40
Max Corner Menu
The Max Corner Menu allows you to set the speed of movement in one direction that the
printer will slow down to before changing direction and accelerating back up to normal
print speed. If this value is set to 0, the printer will come to a complete stop before
accelerating in a different direction, which can result in a "blob" of extruded material on the
spot where it stops.
Setting this to a high value can result in reduced printing times, fewer blobs in your prints,
increased vibrations from rapid direction changes, and smoother prints around corners.
Setting this to a law value can result in, less mechanical stress on your printer, smoother
movements, better adhesion for your filament where the print direction changes, less noise
from your printer, and fewer lost steps.
All values are in mm/second.
•
Back: Touch the Back option to return to the Setting Menu.
•
Max Corner X: Touch the Max Corner X option to set the maximum corner speed on the X-axis.
• Max Corner Y: Touch the Max Corner Y option to set the maximum corner speed on the Y-axis.
•
Max Corner Z: Touch the Max Corner Z option to set the maximum corner speed on the Z-axis.
•
Max Corner E: Touch the Max Corner E option to set the maximum speed of filament extrusion/retraction when changing from
one to the other.
•
Save Parameters: Touch the Save parameters option to save the current settings to memory.