18
6. Install the Z-axis Moving Kit and Adjust the Tightness of the X-axis and Y-axis Tensioners
1x Z-axis Moving Kit
Step 6b: Tighten the X-axis
and Y-axis Tensioners to the
appropriate belt tension.
The difference between the
nut and screw protrusion is
0~2mm. Press the belts to
check the tension. Too loose
can affect printing, while
too tight can cause the belt
Step 6a: Insert the V wheels at the ends of
to break.
of the Z-axis Moving Kit into the grooves
in the sides of Z-axis Profiles on the Printer
Base Kit. Move the Extruder to the left and
1x Printer Base Kit
right to check the tension of the Timing Belt.
The Extruder should touch the X-axis Limit
Switch and the Belt should have elasticity.
Содержание 43363
Страница 1: ...Joule 3D Printer DIY Assembly Kit P N 43363 User s Manual ...
Страница 11: ...11 ...
