31
TCP/IP PORT CONFIGURATION
While you can change the IP Address, Subnet Mask, and Gateway addresses using the
built-in GUI, you cannot make other network changes using the GUI. Instead, you need to
use the built-in WebServer to configure the IP Port, reset the IP addresses to the factory
default values, reset the password to the factory default, and update the firmware.
To access the WebServer, open your internet browser and type 192.168.0.178:100 into the
address bar. If you changed the default IP address, use the new on instead. Use admin for
both the Username and Password.
To upgrade the GUI firmware, click the Administration / Upload Program option. Next, click
the Browse... button and use the file browser to locate the update file. Finally, click the
Apply button to perform the upgrade.
USB FIRMWARE UPGRADE
In the event that a firmware upgrade is made available, perform the following steps to
upgrade the matrix.
1.
Go to Monoprice.com, type 24179 into the search bar, then press the ENTER key or
click the search icon.
2.
Download the .zip file containing the firmware upgrade program.
3.
Extract the .zip file to get the DfuSe Demonstration firmware upgrade program.