12
OPERATION
Front Panel
Perform the following steps to connect an input to one or more outputs.
1.
Press the INPUTS button corresponding to the desired source device.
2.
Press one or more of the OUTPUTS buttons, corresponding to the display(s) on
which you want to view the selected input.
3.
The LED corresponding to the buttons pressed will blink three times if the operation
was successful. If not, the LEDs will remain off.
Examples:
To connect input 1 to output 3, press the INPUTS 1 button, then press the OUTPUTS 3
button.
To connect input 2 to both output 2 and output 4, press the INPUTS 2 button, then
press the OUTPUTS 2 button, followed by the OUTPUTS 4 button.
IR Remote Control
Perform the following steps to direct one of the inputs to one or more
outputs.
1.
Press the numbered button in the INPUTS section of the remote
control corresponding to the desired source device.
2.
Press one or more numbered buttons in the OUTPUTS section
corresponding to the display on which you want to view the
selected input. Alternatively, press the ALL button if you want
to view the selected input on all output displays.
3.
Press the ENTER button in the MENU section to confirm the
operation. Alternatively, press the CLEAR button in the MENU
section if you want to cancel the operation.
