Monogram ZV30S, Руководство по установке

Страница: 14 / 32

14
49-80152 Rev. 8
Installation Instructions
7
INSTALL FILTERS
■ Place filter drip trays into the rear of the hood.
■ Insert the grease filter into the opening and drop
into the trays.
■ To remove the filters, grasp the handle, push the
filter up and lift out.
8
INSTALL IMPLEMENT RODS
■ Use a flat blade screwdriver to install the stand-offs
into the bottom of the hood.
■ Align the implement rod to the stand-offs with the
screw hole towards the inside of the hood. Secure the
rod to the stand-offs with the supplied Allen wrench.
■ Follow the same procedure on the opposite side.
FINALIZE INSTALLATION
■ Install the supplied infrared bulb(s).
■ See the Owner’s Manual for instructions to test
operation.
761Dia26
761Dia27
Screw
Stand-offs
Into
Hood
Use Allen
Wrench to
Secure Rod
to Stand-offs
1” = 2.5 cm; 1’ = 0.3 m