Moneris® Go Plus: Using Your Terminal
62
General application settings
Change these general settings as needed to match the way you work.
1.
On the Settings menu, tap
General application
.
The “General application settings” screen appears.
2.
To change the settings, follow these instructions:
Automatic sign out time
. The application will automatically sign you out
after 120 minutes of no activity. To change this default period, tap the
control handle.
Sign out after transaction
. This option is disabled by default. If you enable
it, the application will sign you out after you complete each transaction.
Display timeout
. By default, the terminal goes into sleep mode after 1
minute of no activity to save battery power. To increase this time, tap the
setting to change it to 2 minutes or 5 minutes.
Report reset time
. This is the time when your reports will reset to $0. To
change it, tap the field and set a new time. For example, if you set it for
12:00am, the reports in the application will cover the period from 12:00
a.m. to 11:59 p.m. It is best to set the Report reset time 2 to 3 hours
outside of your typical business hours – if you close at 10 p.m. set it for 12
a.m., if you close at 2 a.m. set it for 4 a.m. If you are open 24 hours,
choose a logical break point like a shift change.
Recommendation
: If you changed the Report reset time, contact Moneris
to change your batch close time (usually set to 11 p.m.) to reflect your
Report reset time. This way, the time period covered in your batch file will
match the time period covered in your reports.
3.
When you are finished with the General application settings, tap
Save
.
The application returns to the Settings menu.
4.
To return to the default transaction screen, tap the Main menu
≡
icon, then
tap
Transactions
.