PRIME TR3000
34
ENGLISH
Step 4: Assemble Console Components
A.
Attach the blue accessory trays (6) to the
bottom of the console housing ausing 8 self
tapping screws (D).
B.
Attach the console (5) to the console housing
using 6 screws (G). These screws are pre-
installed on the back of the console and need
to be removed first and then reinstalld with
the console in place.
Step 5: Attach Console Assembly
A.
Place the console assembly onto the conso
le support bracket and attach the
assembly using the 7 screws (G). Be sure
not to pinch wire harness during
this step.
B.
Connect all wire harnesses including:
i. Main harness: 5-pin and 7-pin.
ii. Main harness: 7-pin (only AC)
iii. Hand Pulse harness: 2-pin
iv. Speed Control Harness: 3-pin
(the wire colors need to be matched.)
v. Incline Control Harness: 3-pin
(the wire colors need to be matched.)
C.
Tuck extra wiring harness into the opening
behind the console.
Note: Be careful to properly connect all wiring con-
nectors with their correct corresponding wiring
harness. Pay attention not to bend any pins and
make sure the connectors click in place.
D