PRIME TR3000
32
ENGLISH
Step 1: Unpacking Treadmill
A.
Cut packaging straps and remove.
B.
Remove the box top.
C.
Remove small parts and packaging material and unwrap parts.
D.
Cut corners of the bottom box and remove all packaging material to begin assembly. The tread
mill can be assembled in the box. No need to picj the treadmill up to remove it from box.
Step 2: Handlebar Support Post Assembly
A.
Remove the screw (A) and nut (F) that are pre-assembled on the frame from each side of the base
using the 6 mm Allen wrench and 17 mm open end wrench provided in your tool kit.These two
screws will prevent the handlebars from rotating up into their upright position.
B.
Stand the support posts and handlebars up into their operating position and re-attach the screws
(A) and nuts (F) removed in step 2A. Tighten securely.
C.
Attach the left (13) and right (14) base covers using a screwdriver and 2 machine screws on
each side. The 4 base cover attaching screws are located in the hardware bag.