gamma value (
0
,
1
or
2
) with the button
or
and confirm the selection with the button
“MENU”.
Reset All Setting
(factory settings)
If the menu item
Reset All Setting
has been
selected, press the button “MENU”: The mon-
itor is reset to the factory settings and the on-
screen menu is exited.
USB update
(firmware update)
This menu item is not required for operation
and exclusively serves for updating the firm -
ware via the USB port (9) if a new firmware
version is available.
The last line of this menu only serves for infor-
mation and cannot be adjusted.
To return to the main menu level, press the but-
ton “SOURCE”.
10 Specifications
Diagonal screen size: . 48 cm (19″)
Maximum display
resolution: . . . . . . . . . . 1280 × 1024 pixels
Colour system: . . . . . . PAL / NTSC (auto)
Angle of view: . . . . . . . hor. 170°, vert. 160°
Response time: . . . . . 1.3 / 3.7 ms
Brightness: . . . . . . . . . 250 cd / m
2
Contrast ratio: . . . . . . . 1000 : 1
Colour display: . . . . . . 16.7 million colours
Inputs for the
signal sources: . . . . . . 1 × HDMI
TM
1 × DVI-D
1 × VGA
1 × S-Video
2 × BNC
2 × RCA
(“AUDIO IN”)
1 × 3.5 mm jack
(“PC AUDIO IN”)
Feed-through outputs
Video: . . . . . . . . . . . 2 × BNC
Audio: . . . . . . . . . . . 2 × RCA
Speaker: . . . . . . . . . . . 2 W
Power supply: . . . . . . . via supplied PSU con-
nected to 230 V~ / 50 Hz
Ambient temperature: . 0 – 40 °C
Dimensions: . . . . . . . . 425 × 352 × 53 mm
(w/o base)
Hole distance for
mounting the bracket: . VESA-100 standard
(100 × 100 mm)
Weight: . . . . . . . . . . . . 3.7 kg (w/o base)
Subject to technical modification.
13
GB
All rights reserved by MONACOR
®
INTERNATIONAL GmbH & Co. KG. No part of this instruction
manual may be reproduced in any form or by any means for any commercial use.
