9
English
To
call up a stored station
, either select the
appropriate station number with the button
I
or
I
(24) or enter it by means of the
numeric keys (29) .
To
manually set a station
(in steps of 0 .1 MHz),
use the buttons F− and F+ (25) .
Notes with regard to station number indication:
After manual frequency setting, the display will show
FM:
00
– when the frequency set has not been stored as a
station number
– when the frequency set has already been stored as
a station number via station scan and the reception
quality is poor
The next time you switch to the mode “Radio”, the
display will not show
FM:
00
, but the station number
whose frequency is close to the frequency set, or, if
no station number is found, station number 1 .
7 Specifications
RMS output power at 4 Ω: � � 2 × 70 W
Frequency range: � � � � � � � � � 20 – 20 000 Hz
S / N ratio: � � � � � � � � � � � � � � 90 dB
THD: � � � � � � � � � � � � � � � � � � 0�1 %
Inputs (connection,
sensitivity / impedance)
MIC, mono, balanced: � � � � combined
XLR / 6�3 mm jack,
1�3 mV/500 Ω
AUX, stereo: � � � � � � � � � � � 3�5 mm jack,
190 mV/10 kΩ
LINE IN, stereo: � � � � � � � � � RCA jacks,
480 mV/20 kΩ
AMP IN, stereo: � � � � � � � � RCA jacks,
580 mV/22 kΩ
Tone control
Low frequencies:� � � � � � � � ±12 dB/ 100 Hz
High frequencies: � � � � � � � ±10 dB/ 10 kHz
Power supply: � � � � � � � � � � � 230 V/50 Hz
Power consumption: � � � � � � 350 VA
Ambient temperature: � � � � � 0 – 40 °C
Dimensions: (W × H × D): � � 482 × 44 × 245 mm,
1 RS
Weight: � � � � � � � � � � � � � � � � 4�9 kg
Subject to technical modification .
player will automatically switch to the medium
still connected . To switch over between the
media, the button MODE (21) can also be used
(see chapter 6 .1 .2) .
The
display
will show:
–
U
for USB medium,
S
for memory card
the letter is preceded by the respective sym-
bol for replay, pause or stop
– the time already played of the title
– the replay mode (
ALL
,
FOLDER
,
SINGLE
or
RANDOM
): see below
– the number of the title and the file name
To
set the replay to pause
, press the button
II
(22); to
stop the replay
and to return to
the beginning of the title, press the button
(23) at the unit or STOP (23) on the remote
control . To
continue
the replay
, press the
button
II
.
To
select a title
, either use the buttons
I
and
I
(24) or enter the title number by means
of the numeric keys (29) .
Note:
In the replay mode
RANDOM
, it is not possible
to go back to the previous title or to select titles
by means of the numeric keys . In the replay mode
FOLDER
, only the titles of the current folder can
be selected .
To
select a folder
, use the buttons F− and F+
(25) . To select a title in the folder by means of
the button
I
or
I
, first wait for the name
of the folder to disappear from the display;
otherwise, you will go to the previous / next
folder when you press
I
or
I
.
For
fast reverse and fast forward
(functions
only available during replay), keep the button
I
or
I
(24) on the remote control pressed .
Fast forward will go beyond the current title;
fast reverse will stop at the beginning of the
current title .
Use the button EQ (20) to select the
equalizer
setting
desired (function only available during
replay) . It is possible to switch over between:
NORMAL
,
ROCK
,
POP
,
CLASSIC
,
JAZZ
,
COUNTRY
.
Note:
After each switch-on or change to the mode
“Player”, the equalizer setting will be reset to
NORMAL
.
To select the
replay mode
(function only avai-
lable during replay), use the button
(19) at
the unit or the button (19) on the remote
control . It is possible to switch over between:
ALL
= all titles continuously replayed one
after the other
FOLDER
= all titles of the current folder con-
tinuously replayed one after the
other
SINGLE
= current title continuously replayed
RANDOM
= all titles continuously replayed in
random order
Note:
After each switch-on or change to the mode
“Player”, the replay mode will be reset to
ALL
.
This reset will also be made when the button F− or
F+ (25) is pressed to select a folder .
6.1.5 Operating mode “Bluetooth”
The Bluetooth receiver can be used to establish
a wireless connection to a Bluetooth signal
source (e . g . smartphone, tablet PC, notebook)
and thus to replay the audio files stored on the
signal source via the SA-130DMP .
Establishing a Bluetooth connection:
1) Use the button MODE (21) to select the
operating mode “Bluetooth” (
Blue
tooth
shown on the display): The display
will show
Initializing.
.
.
and
then
Discon nected!
to indicate that
no Bluetooth connection is established
2) At the Bluetooth source, switch on the Blue-
tooth function .
3) On the display of the Bluetooth source,
the Bluetooth receiver will be indicated as
“Bluetooth” . Pair the Bluetooth source with
the Bluetooth receiver (please refer to the
instruction manual of the Bluetooth source,
if required) .
4) Once the Bluetooth connection has been
established, the display will show
Con
nected!
.
5) Use the buttons of the Bluetooth source
for operation (replay, pause, title selection)
or the button
II
(22) for replay / pause and
the buttons
I
and
I
(24) on the remote
control for title selection .
6.1.6 Operating mode “Radio”
Use the button MODE (21) to select the oper-
ating mode “Radio” . The
display
will show:
– the FM frequency adjusted (in MHz)
–
FM:
01
… the station number under which
the FM frequency has been stored
by means of the scan function
(also see notes at the end of this
chapter)
– the basic volume adjusted (
VOL
)
(see chapter 6 .1 .3)
To
store stations
, press the button
II
(22):
The station scan will start . The transmission
frequencies found will be automatically stored
as station numbers . When the station scan is
completed, the frequency of station number 1
will be selected .
To cancel the scan function at any time,
press the button
II
again .
21 22 23
17
15
16
18
19 20
24
25
➂
7
8
9
4
5
6
2
1
3
0
MODE
STOP
EQ
26 23 27
19
21
20
22
29
24
28
All rights reserved by MONACOR
®
INTERNATIONAL GmbH & Co. KG. No part of this instruction manual may
be reproduced in any form or by any means for any commercial use.
