Monaco SIGNATURE 2001 series, Руководство пользователя

Страница: 165 / 327

The filter elements will need to be removed and the filter bowls reassem-
bled, without the elements, before disinfecting the water system with a chlorine
bleach solution. To change the filter elements use the following procedure.
To Remove:
• Turn off the water supply and the water pump. Open the faucet to
bleed off pressure.
• Unscrew the filter bowl from the filter head.
• Remove the old element and empty any remaining water in the
bowl.
To Install:
• Place the elements in the bowls, observing primary and secondary
filter locations.
• Screw the bowls onto the filter heads, hand tight.
• Turn on the water pump or city water.
• Open the outside faucet and purge air from the filter assembly.
• Check for leaks.
Water system problems and leaks usually fall into two categories: system
problems and problems caused by improper use or lack of attention. These
problems usually stem from improper winterizing, poor maintenance, road
vibration and campsite water pressure variations. Check all plumbing connec-
tions for leaks at least once a year. If the water pump runs when a faucet is not
open, check for a water leak. If a water line or fitting is leaking try to tighten
the fitting. If the leak has not stopped use the water manifold key to shut-off the
water supply valve. Have the leak repaired before returning the supply line to
service.
NOTE: A small water leak can cause severe water damage. Shut-off
the water supply and have the leak repaired.
Water Systems
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
S I G N A T U R E
6 • 1 6 5
Water Filter Removal Wrench.
WATER SYSTEM -
Troubleshooting