Moffat Turbofan G32MS, Руководство по обслуживанию, Страница: 37 / 70

-37-
Revision 6/F3590 © Moffat Ltd, February 2005
4) Unscrew and remove the burner injector
from the burner mouth at the oven front.
6.3.23 OUTER GLASS
3) Remove screws securing door handle,
and remove the handle from the door
assembly.
4) Remove four screws in top trim and four
screws in bottom trim of door, and remove
trim panels.
6.3.20 GAS CONTROL VALVE
1) Remove the manual gas control valve
access panel and burner access panel
(refer 6.2.4 and 6.2.5).
2) Close the manual gas valve.
3) Disconnect the mack union in the gas line
next to the manual gas valve.
5) Remove the two screws securing the gas
valve mounting bracket to the burner box
panels.
6) Disconnect the three leads from the gas
control valve.
7) Remove the gas valve and connected
piping by drawing out through the side
service panel.
8) Replace and reassemble in reverse order.
Figure 6.3.24
Mack union
Burner
injector
Figure 6.3.25
6.3.22 BURNER
Figure 6.3.26
1) Remove burner access panel (refer 6.2.4).
2) Remove ignition electrode assembly (refer
6.3.17)
3) Remove the saddle clamp securing the
burner to the oven.
6.3.21 BURNER INJECTOR
1) Remove burner access panel (refer 6.2.4).
2) Remove injector from burner throat.
3) Clean or replace injector as required.
Re-assemble in reverse order.
Bottom pivot
Figure 6.3.28
Burner
injector
Saddle
clamp
Figure 6.3.27
Figure 6.3.29
Screws
4) Burner can now be withdrawn from the
oven. Inspect / replace and re-assemble
in reverse order.
1) Open door
2) Loosen the two screws securing the
bottom pivot whilst supporting the door.
The pivot can now be lowered, and the
door removed from the oven.