Moffat Turbofan G32MS Скачать руководство пользователя страница 34 | Manualshive

Страница: 34 / 70

Moffat Turbofan G32MS Скачать руководство пользователя страница 34

-34-

Revision 6/F3590

©

Moffat Ltd, February 2005

Two screws

6.3.10 HOLD THERMOSTAT

5) Withdraw old thermostat phial through

side of oven. Note position in phial
bracket.

6) Insert new thermostat.
7) Re-assemble in reverse order.

NOTE:

Ensure that the thermostat phials are

located in their correct positions. The
main thermostat probe must be on the
side closest to the door. The hold
thermostat must be on the side closest to
the fan.

1) Open control panel (refer 6.2.1) and undo

two screws securing hold thermostat
bracket.

2) Remove the two screws securing the hold

thermostat to the bracket, and then fit the
new thermostat in its place.

3) Transfer wires to new thermostat.
3) Open oven door, remove racks and fan

baffle rack. Loosen the thermostat phial
bracket (refer figure 6.3.10).

4) Withdraw the old hold thermostat phial

through the side of the oven. Note the
position of the phial in the bracket.

Figure 6.3.12

Figure 6.3.14

6.3.12 WATER SOLENOID CLEANING

1) Disconnect water supply from the water

solenoid.

2) Remove the sieve from the valve

assembly by pulling firmly away from the
assembly with a pair of pliers.

3) Clean the sieve, removing all dirt and

grime.

4) Replace the sieve and reconnect the

water supply.

6.3.11 WATER SOLENOID

1) Ensure water supply is turned off.
2) To access the solenoid, remove the right

hand service panel (refer 6.2.2)

3) Disconnect all water connections from the

water solenoid.

4) Remove water solenoid from oven by

removing two screws securing the water
solenoid to its mounting bracket.

5)  Carefully withdraw solenoid.
6)  Replace or service solenoid as required.
7)  To reinstall, reverse procedure.
8)  Check water connections do not leak.

Figure 6.3.13

Water

solenoid

Control thermostat

phial

Hold thermostat

phial

Towards

the

door

Sieve

Figure 6.3.11

5) Insert new thermostat phial.
6) Re-assemble in reverse order.

NOTE:

Ensure that the thermostat phials are

located in their correct positions. The
main thermostat probe must be on the
side closest to the door. The hold
thermostat must be on the side closest to
the fan (refer figure 6.3.11).

«
...
32
33
34
35
36
...
»

Содержание Turbofan G32MS







































































Отзывы:

Нет отзывов