Moffat turbofan E32SUBC, Руководство по обслуживанию

Страница: 44 / 68

6
Service Procedures
40
Revision 3
© Moffat Ltd, September 2009
E32SUBC OVEN and PROOFER
Figure 6.3.10
Hinge Body
Hinge pivot
two screws
2) Slide door out at top and remove hinge pivot.
3) Lift door vertically off bottom hinge body (if
sticky loosen bottom hinge body two screws).
4) Remove bottom hinge pivot from door.
5) Fit hinge pivots (top and bottom) to new
door.
6) Re-assemble in reverse order.
6.3.11 Door Glass
1) Remove door as per steps one to three of
section 6.3.10.
2) Lay door face down on bench and remove
door seal.
Figure 6.3.11
Door Seal
Door Inner
14 Screws
Door Glass
Door Outer
3) Remove door inner (14 screws) and remove
glass.
4) Clean glass and replace in reverse order.
Ensure silicone seals have not been
displaced from door outer and door inner.
5) Reassemble and refit door in reverse order.
6.3.10 Door
6.3.9 Door Catch Magnet
6.3.8 Door Handle
Figure 6.3.8
1) Open proofer door.
2) Remove four screws, remove handle.
3) Replace and re-assemble in reverse order.
Top screws
1) Open proofer door.
2) Unscrew two screws securing magnet to
door.
3) Replace magnet catch and re-assemble in
reverse order.
Two screws
Magnet
Figure 6.3.9
1) Remove two screws from top of door holding
hinge to door.